This is one of the samples related to the Neutrino bot or Kasidet. Its code was leaked in the underground forum last July 2015.
To get a one-glance comprehensive view of the behavior of this Backdoor, refer to the Threat Diagram shown below.

This backdoor arrives as attachment to mass-mailed email messages.
It executes commands from a remote malicious user, effectively compromising the affected system. However, as of this writing, the said sites are inaccessible.
It deletes itself after execution.
Arrival Details
This backdoor arrives as attachment to mass-mailed email messages.
Installation
This backdoor adds the following folders:
- %Application Data%\Y1FeZFVYXllb
(Note: %Application Data% is the Application Data folder, where it usually is C:\Documents and Settings\{user name}\Application Data on Windows 2000, Windows Server 2003, and Windows XP (32- and 64-bit); C:\Users\{user name}\AppData\Roaming on Windows Vista (32- and 64-bit), Windows 7 (32- and 64-bit), Windows 8 (32- and 64-bit), Windows 8.1 (32- and 64-bit), Windows Server 2008, and Windows Server 2012.)
It drops the following copies of itself into the affected system:
- %Application Data%\Y1FeZFVYXllb\{random filename}.exe
(Note: %Application Data% is the Application Data folder, where it usually is C:\Documents and Settings\{user name}\Application Data on Windows 2000, Windows Server 2003, and Windows XP (32- and 64-bit); C:\Users\{user name}\AppData\Roaming on Windows Vista (32- and 64-bit), Windows 7 (32- and 64-bit), Windows 8 (32- and 64-bit), Windows 8.1 (32- and 64-bit), Windows Server 2008, and Windows Server 2012.)
It adds the following mutexes to ensure that only one of its copies runs at any one time:
Autostart Technique
This backdoor adds the following registry entries to enable its automatic execution at every system startup:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\
Windows\CurrentVersion\Run
{random filename}.exe = "%Application Data%\Y1FeZFVYXllb\{random filename}.exe"
HKEY_CURRENT_USER\Software\Microsoft\
Windows\CurrentVersion\Run
{random filename}.exe = "%Application Data%\Y1FeZFVYXllb\{random filename}.exe"
Other System Modifications
This backdoor adds the following registry keys:
HKEY_CURRENT_USER\Software\MWZLesson
HKEY_CURRENT_USER\Software\MWZLesson\
Addr
It adds the following registry entries:
HKEY_CURRENT_USER\Software\MWZLesson
rate = "{value}"
HKEY_CURRENT_USER\Software\MWZLesson
{random digits} = "{value}"
HKEY_CURRENT_USER\Software\MWZLesson
arr = "Base-64 of URL"
Backdoor Routine
This backdoor executes the following commands from a remote malicious user:
- Download and Execute Files (vbs, dll, exe)
- Update itself
- Uninstall itself
- Find File
- Perform Remote Shell
- Performs DDOS attack
It connects to the following URL(s) to send and receive commands from a remote malicious user:
- http://{BLOCKED}y.su/mu/tasks.php
- http://{BLOCKED}p.su/mu/tasks.php
However, as of this writing, the said sites are inaccessible.
Information Theft
This backdoor gathers the following data:
- ComputerName
- OS Version
- Machine GUID
Other Details
This backdoor deletes itself after execution.
NOTES:
{random filename} is either svchost.exe or any .exe file found in the %Windows% directory that does not contain the following strings:
- install
- setup
- update
- patch
It scans the memory of all running processes to get credit card data Track 1 and 2 except for the following processes:
- System
- smss.exe
- csrss.exe
- winlogon.exe
- lsass.exe
- spoolsv.exe
- devenv.exe
It hooks Windows API of the following browsers and clients:
- Firefox
- Chrome
- Internet Explorer
It checks for the following:
- If Self Debugger or Remote Debugger is present
- If COMPUTER NAME contains the following strings:
- MALTEST
- TEQUILABOOMBOOM
- SANDBOX
- VIRUS
- MALWARE
- If the path of the file contains the following strings:
- If kernel32.dll exports the following function:
- If any of the following registries are present:
- HKEY_LOCAL_MACHINE\SOFTWARE\VMware, Inc.\VMware Tools
- HKEY_LOCAL_MACHINE\SOFTWARE\Oracle\VirtualBox Guest Additions
- If the data of the following registry entry contains VMWARE,VBOX,QEMU:
- HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\Scsi\Scsi Port 0\Scsi Bus 0\Target Id 0\Logical Unit Id 0
Identifier
- If the data of the following registry entry contains VBOX,QEMU,BOCHS:
- HKEY_LOCAL_MACHINE\HARDWARE\Description\System
SystemBiosVersion
- If the data of the following registry entry contains VIRTUALBOX:
- HKEY_LOCAL_MACHINE\HARDWARE\Description\System
VideoBiosVersion
If any of the conditions is met, it terminates itself and displays an error message:

Below is a sample of the said spam mail:

Step 1
Before doing any scans, Windows XP, Windows Vista, and Windows 7 users must disable System Restore to allow full scanning of their computers.
Step 2
Note that not all files, folders, and registry keys and entries are installed on your computer during this malware's/spyware's/grayware's execution. This may be due to incomplete installation or other operating system conditions. If you do not find the same files/folders/registry information, please proceed to the next step.
Step 3
Restart in Safe Mode
[ Learn More ]
[ back ]
To restart in Safe Mode:
• For Windows 2000 users
- Restart your computer.
- Press F8 when you see the Starting Windows bar at the bottom of the screen.
- Choose the Safe Mode option from the Windows Advanced Options menu then press Enter.
• For Windows XP users
- Restart your computer.
- Press F8 after the Power-On Self Test (POST) routine is done. If the Windows Advanced Options menu does not appear, try restarting then pressing F8 several times when the POST screen appears.
- Choose the Safe Mode option from the Windows Advanced Options menu then press Enter.
• For Windows Server 2003 users
- Restart your computer.
- Press F8 after Windows starts up. If the Windows Advanced Options menu does not appear, try restarting again and pressing F8 several times afterward.
- On the Windows Advanced Option menu, use the arrow keys to select Safe Mode then press Enter.
• For Windows Vista, Windows 7, and Windows Server 2008 users
- Restart your computer.
- Press F8 after the Power-On Self Test (POST) routine is done. If the Advanced Boot Options menu does not appear, try restarting and then pressing F8 several times after the POST screen is displayed.
- On the Advanced Boot Options menu, use the arrow keys to select the Safe Mode option, and then press Enter.
• For Windows 8, Windows 8.1, and Windows Server 2012 users
- Access the Charms bar by moving your mouse pointer to the upper right corner of the screen.
- Move your mouse pointer down and click Settings>Change your PC Settings.
- In the left panel, click General.
- In the right panel, scroll down to the bottom to find the Advanced startup section, then click the Restart now button and wait for the system to restart.
- In the Advanced Startup menu, click Troubleshoot>Advanced Options>Startup Settings>Restart and wait for the system to restart.
- In the Startup Settings menu, press 4 to enable safe mode.
Step 4
Delete this registry value
[ Learn More ]
[ back ]
Important: Editing the Windows Registry incorrectly can lead to irreversible system malfunction. Please do this step only if you know how or you can ask assistance from your system administrator. Else, check this Microsoft article first before modifying your computer's registry.
- In HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
- {random filename}.exe = "%Application Data%\Y1FeZFVYXllb\{random filename}.exe"
- In HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run
- {random filename}.exe = "%Application Data%\Y1FeZFVYXllb\{random filename}.exe"
To delete the registry value this malware created:
- Open Registry Editor. To do this:
» For Windows 2000, Windows XP, and Windows Server 2003 users, click Start>Run, type regedit in the text box provided, and then press Enter.
» For Windows Vista, Windows 7, and Windows Server 2008 users, click the Start button, type regedit in the Search input field then press Enter.
» For Windows 8, Windows 8.1, and Windows Server 2012 users, right-click on the lower left corner of the screen, click Run, type regedit in the text box provided, and then press Enter. - In the left panel of the Registry Editor window, double-click the following:
HKEY_LOCAL_MACHINE>SOFTWARE>Microsoft>Windows>CurrentVersion>Run - In the right panel, locate and delete the entry:
{random filename}.exe = "%Application Data%\Y1FeZFVYXllb\{random filename}.exe" - In the left panel of the Registry Editor window, double-click the following:
HKEY_CURRENT_USER>Software>Microsoft>Windows>CurrentVersion>Run - In the right panel, locate and delete the entry:
{random filename}.exe = "%Application Data%\Y1FeZFVYXllb\{random filename}.exe" - Close Registry Editor.
Step 5
Delete this registry key
[ Learn More ]
[ back ]
Important: Editing the Windows Registry incorrectly can lead to irreversible system malfunction. Please do this step only if you know how or you can ask assistance from your system administrator. Else, check this Microsoft article first before modifying your computer's registry.
- In HKEY_CURRENT_USER\Software
To delete registry keys this malware/grayware created:
- Open Registry Editor. To do this:
» For Windows 2000, Windows XP, and Windows Server 2003 users, click Start>Run, type regedit in the text box provided, and then press Enter.
» For Windows Vista, Windows 7, and Windows Server 2008 users, click the Start button, type regedit in the Search input field then press Enter.
» For Windows 8, Windows 8.1, and Windows Server 2012 users, right-click on the lower left corner of the screen, click Run, type regedit in the text box provided, and then press Enter. - In the left panel of the Registry Editor window, double-click the following:
HKEY_CURRENT_USER>Software - Still in the left panel, locate and delete the key:
MWZLesson - Close Registry Editor.
Step 6
Search and delete this folder
[ Learn More ]
[ back ]
Please make sure you check the
Search Hidden Files and Folders checkbox in the More advanced options option to include all hidden folders in the search result.
- %Application Data%\Y1FeZFVYXllb
To delete the malware/grayware folder:
- Right-click Start then click Search... or Find..., depending on the version of Windows you are running.
- In the Named input box, type:
- %Application Data%\Y1FeZFVYXllb
- In the Look In drop-down list, select My Computer, then press Enter.
- Once located, select the folder then press SHIFT+DELETE to permanently delete the folder.
Step 7
Restart in normal mode and scan your computer with your Trend Micro product for files detected as BKDR_KASIDET.FD. If the detected files have already been cleaned, deleted, or quarantined by your Trend Micro product, no further step is required. You may opt to simply delete the quarantined files. Please check this Knowledge Base page for more information.
Did this description help? Tell us how we did.