Locked, Loaded, and in the Wrong Hands: Legitimate Tools Weaponized for Ransomware in 2021

Locked, Loaded, and in the Wrong Hands:
Legitimate Tools
Weaponized for
Ransomware in 2021

These tools were intended for use in security research and other authorized purposes. However, cybercriminals have found a way to exploit them for ransomware campaigns. What are some of these tools and how exactly are they weaponized?

By Janus Agcaoili and Earle Earnshaw

As ransomware operators continue to equip themselves with more weapons in their arsenal, the stakes are getting even higher for targeted organizations that can suffer from grave consequences brought about by these attacks. Organizations that are affected by ransomware attacks typically incur losses in financial damages worth millions, alongside experiencing inaccessibility and even exposure of sensitive data.

Most of the recent ransomware campaigns have adopted double extortion techniques where threat actors both encrypt a company’s files and leak their data to the public. As for its evolution, we foresaw in our security predictions that ransomware in 2021 will become an even more sinister threat as it becomes more targeted and new families (such as Egregor) emerge. This year, cybercriminals will also continue to abuse legitimate tools to facilitate ransomware attacks.

On their own, these tools are not inherently malicious. Rather, they are intended to help security research or enhance the efficiency of programs. However, like many other technologies, cybercriminals have found a way to exploit them. Eventually, these tools became a typical component of ransomware campaigns and at times, even other cyberattacks. The UK’s National Cyber Security Centre (NCSC) has published a list of such tools in a report.

There are several reasons that the use of legitimate tools for ransomware campaigns is such an attractive option for cybercriminals. For one, since these tools are not malicious per se, they might evade detection. It also does not hurt that most of these tools are open-source and therefore can be accessed and used by the public for free. Finally, the usefulness of the tools’ features — the same ones that security researchers benefit from — makes them advantageous for cybercriminals, thereby turning these platforms into unintended, double-edged swords.

In this entry, we discuss some of the most commonly abused legitimate tools: Cobalt Strike, PsExec, Mimikatz, Process Hacker, AdFind, and MegaSync.

Commonly Abused Legitimate Tools

Here is a summary of some of the most commonly abused legitimate tools:

ToolIntended UseHow It is Used for Ransomware CampaignsRansomware Campaigns That Used This Tool
Cobalt Strike Threat emulation Lateral movement, backdoor

Has many other capabilities as a remote access trojan (RAT)
Clop, Conti, DoppelPaymer, Egregor, Hello (WickrMe), Nefilim, NetWalker, ProLock, RansomExx, Ryuk
PsExec Executing processes on other systems Arbitrary command shell execution, lateral movement DoppelPaymer, Nefilim, NetWalker, Maze, Petya, ProLock, Ryuk, Sodinokibi
Mimikatz Proof-of-concept code for demonstrating vulnerabilities Credential dumping DoppelPaymer, Nefilim, NetWalker, Maze, ProLock, RansomExx, Sodinokibi
Process Hacker Monitoring system resources, debug software, and detect malware Process/service discovery and termination (including antimalware solutions) Crysis, Nefilim, Sodinokibi
AdFind Active Directory (AD) search utility AD discovery (can be a prerequisite for lateral movement) Nefilim, NetWalker, ProLock, Sodinokibi
MegaSync Cloud-based synchronization Data exfiltration Hades, LockBit, Nefilim

Table 1. Weaponized legitimate tools

Some of the tools listed in the following figure also have similar purposes with other platforms. For example, like Process Hacker, PC Hunter, GMER, and Revo Uninstaller can be exploited to terminate antimalware solutions. Likewise, both Mimikatz and LaZagne can be used for credential dumping.

Figure 1. Examples of ransomware campaigns that abuse legitimate tools for various attack stages

Notably, some campaigns use several tools at the same time, rather than just a single tool at a time, since one tool can enable the other. For example, Mimikatz, which can be abused to steal credentials, can grant access to PsExec functions that require admin privileges. One of the campaigns that employed several tools at the same time is Nefilim, which used AdFind, Cobalt Strike, Mimikatz, Process Hacker, PsExec, and MegaSync, among other tools.

How weaponized legitimate tools are used in a ransomware campaign

Figure 2. How weaponized legitimate tools are used in a ransomware campaign

In the next sections, we elaborate further on the uses of these tools as well as how they are used in ransomware campaigns.

Cobalt Strike

Tool’s intended use: Cobalt Strike is meant to be used as a threat emulation software that can perform reconnaissance, covert communication, spear phishing, and post-exploitation. It is used by security researchers for a variety of functions, including penetration testing.

Possible uses for ransomware: Cybercriminals use this tool in campaigns for lateral movement or as a backdoor. As a RAT, it also has many other capabilities. This tool can avoid detection by obfuscating shellcode and using Malleable Command and Control (aka Malleable C2).

Campaigns that it was used for: Some ransomware campaigns that abused Cobalt Strike are Conti, Clop, DoppelPaymer, Egregor, Hello (WickrMe), NetWalker, Nefilim, ProLock, RansomExx, and Ryuk, and Sodinokibi. We also found that it is compatible with proof-of-concept ransomware Povlsomware.

In our recent analysis on Conti, the ransomware dubbed as the successor of Ryuk, we discussed how Cobalt Strike beacons (Cobalt Strike’s covert payload) served as backdoors for the attack. The tool was also used for lateral movement. This was performed via actions such as accessing and dumping credential hashes from LSASS, using the harvested passwords for further movement, sending files to remote drives, and using Windows Management Instrumentation (WMI) commands to run either a DLL or EXE copy of itself.


Tool’s intended use: PsExec is a “light-weight telnet-replacement” utility that lets users run Windows Server processes on remote systems. It also features full interactivity for console applications without needing to install the client software manually.

Possible uses for ransomware: With attackers leveraging the features that enable a user to execute processes on remote systems, PsExec can be abused for arbitrary command shell execution and lateral movement. PsExec can also be used for propagation and remote execution of ransomware.

Campaigns that it was used for: PsExec has been exploited for ransomware campaigns such as Nefilim, Ryuk, and Sodinokibi. It was also weaponized in DoppelPaymer, NetWalker, Maze, Petya, and ProLock campaigns.

Discovered in early 2020, Nefilim is one of the recently emerged ransomware types that threaten organizations not only with the encryption of data, but also the public exposure of sensitive information. It was also found to share similarities with Nemty 2.5. In particular, a Nefilim campaign took advantage of PsExec in several ways: to copy a .bat file (which contains hard-coded admin credentials) that will then be remotely executed to stop services and execute the ransomware.


Tool’s intended use: Mimikatz is intended to be, in the tool creator’s own words, “A little tool to play with Windows security.” Mimikatz was built as a proof-of-concept code to demonstrate the vulnerabilities in Microsoft authentication protocols. It can harvest passwords, hashes, PIN codes, and Kerberos tickets.

Possible uses for ransomware: Cybercriminals employ the features of Mimikatz for credential dumping to extract usernames, passwords, and other credentials that might be used to escalate privilege in other phases of the attack.

Campaigns that it was used for: Attacks where Mimikatz is abused include those for DoppelPaymer, Nefilim, NetWalker, Maze, ProLock, RansomExx, and Sodinokibi.

NetWalker can be executed filelessly using legitimate programs in the system; the ransomware is not compiled but is written in PowerShell and executed in the memory directly without needing to store the actual binary into the disk. The sample from the campaign that we observed abused PowerSploit’s Invoke-Mimikatz, an open-source program that can reflectively load Mimikatz. After being loaded, the tool can then perform credential dumping. Other campaigns have also shown how NetWalker launches Mimikatz to steal credentials that will then be used to launch PsExec and deploy the said ransomware.

Similar tool: LaZagne, an open-source application used to retrieve passwords for various software, has also been exploited for credential dumping in campaigns for several ransomware variants such as RansomExx and Nefilim and NetWalker. NetPass can also be used to gather credentials.

Process Hacker

Tool’s intended use: Process Hacker is a free tool that is intended to be used to identify and stop processes. In turn, it can be employed for detecting malware, monitoring system resources, and debugging software. It can pinpoint runaway processes, processes that are using a particular file, programs that have active network connections, and real-time information on disk access and usage, among other things.

Possible uses for ransomware: As Process Hacker can be used to gain an overview of processes currently being used, cybercriminals have weaponized this function for ransomware campaigns to discover and terminate arbitrary processes and services, including those that are antimalware-related.

Campaigns that it was used for: Campaigns that benefited from this tool include Crysis, Nefilim, and Sodinokibi. The tool was used to identify and disable antimalware solutions.

Crysis (aka Dharma) has, on several occasions, used Process Hacker to alter processes and security solutions. The installer of the tool was also part of a 2018 attack as prc.exe. A more recent attack also used the tool (as Processhacker.exe) for similar functions.

Similar tools: Tools such as PC Hunter (which grants access to system processes, kernel modes, and hooks), GMER (which detects and removes rootkits) and Revo Uninstaller (which can uninstall apps and programs) also terminate programs and antimalware solutions. Similar to the case of Process Hacker, the three have been used in Crysis and Nefilim campaigns.


Tool’s intended use: AdFind is a free command-line AD query tool that can be used to collect information from AD. AdFind can query AD for computers, identify domain users and domain groups, extract subnet information from AD, and collect information about organizational units on domain trusts.

Possible uses for ransomware: AdFind can be used to discover computers, users, or groups with AD as a reconnaissance tool, as well as to equip ransomware with the resources that it needs for lateral movement via AD.

Campaigns that it was used for: Nefilim, NetWalker, ProLock, and Sodinokibi are among the ransomware families where operators weaponized AdFind.

For ProLock, AdFind was used as a reconnaissance tool to query AD for the ProLock ransomware campaign.

Similar tools: BloodHound, which can track relationships within AD domains, and SMB Tool, which can show shared resources in a network, are likewise exploited.


Tool’s intended use: MegaSync is a cloud-based synchronization tool that is designed to work with the MEGA file-sharing service. It lets users sync files to devices and can also be used for storing and managing files, as well as for collaborating and sharing data with other users.

Possible uses for ransomware: MEGA and MegaSync can be used for data exfiltration — a vital step for recent ransomware campaigns that wield the double extortion technique, since they not only encrypt files but also steal and threaten to publicly expose a targeted company’s sensitive data.

Campaigns that it was used for: Hades, LockBit, and Nefilim are some of the ransomware campaigns that used this tool.

LockBit is one of the ransomware variants that employs the double extortion technique. The LockBit ransomware operators employ MegaSync for exfiltration, taking advantage of the storage and ease of access of the tool to be able to quickly upload files from the affected system.

Defense Against Disguised Enemies

The presence of weaponized legitimate tools must be detected so that security teams can stop a ransomware campaign dead in its tracks. However, this is easier said than done as these tools might evade detection in several ways. One is through features that can be used to implement evasion techniques, like in the case of Cobalt Strike. Cybercriminals can also alter the code of these tools to tweak parts that trigger antimalware solutions.

Additionally, when spotted from a single entry point (for example, when looking at the endpoint alone), the detections might seem benign by themselves, even when they should raise the alarm — that is, if they were viewed from a broader perspective and with greater context with regard to other layers such as emails, servers, and cloud workloads.

In tracking ransomware campaigns, organizations would be better protected if they rely not only on detections of files and hashes but also on monitoring behavior across layers. This is what we did for our recent investigation on the Conti ransomware, which we tracked using Trend Micro Vision One.

Solutions such as Trend Micro Vision One provide increased visibility and correlated detections across layers (endpoints, emails, servers, and cloud workloads), ensuring that no significant incidents go unnoticed. This allows faster response to threats before they can do any real damage to the system.

Indicators of Compromise (IOCs)

Note: Actual detections might vary based on the hashes involved in the attack.

ToolTrend Micro Pattern Detection
Cobalt Strike Backdoor.Win64.COBEACON.SMA
PsExec N/A

Recommendation: Check suspicious PsExec activity in SMB network and shared folders
Mimikatz HackTool.Win32.MIMIKATZ.SMGD
Process Hacker PUA.Win64.ProcHack.AC
PC Hunter PUA.Win64.PCHunter.A
LaZagne HackTool.Win64.LAZAGNE.AE

Like it? Add this infographic to your site:
1. Click on the box below.   2. Press Ctrl+A to select all.   3. Press Ctrl+C to copy.   4. Paste the code into your page (Ctrl+V).

Image will appear the same size as you see above.